1 of 3 Hueforges I created for the new film. Print all 3!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Matte Dark Red Transmission Distance: 1.5
    PLA BambuLab Matte Mandarin Orange Transmission Distance: 2.6
    PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
    PLA BambuLab Matte Ivory White Transmission Distance: 3.2

Swap Instructions:
    Start with Dark Red
    At layer #11 (0.96mm) swap to Mandarin Orange
    At layer #13 (1.12mm) swap to Lemon Yellow
    At layer #17 (1.44mm) swap to Ivory White for the rest.