1 of 3 Godzilla X Kong hueforges I created for the films release.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.7
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Ash Gray
At layer #19 (1.6mm) swap to Ivory White for the rest.