Godzilla X Kong Hueforge - Godzilla footprint
Copyright Claim
Godzilla X Kong Hueforge - Godzilla footprint
Boost
15
22
5
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.1 h
1 plate
Open in Bambu Studio
Boost
15
22
5
0
14
6
Released
Description
1 of 3 Godzilla X Kong hueforges I created for the films release.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA BambuLab Matte Dark Brown Transmission Distance: 1.9
PLA PolyTerra Earth Brown Transmission Distance: 0.3
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
Swap Instructions:
Start with Charcoal
At layer #12 (1.04mm) swap to Dark Brown
At layer #15 (1.36mm) swap to Earth Brown
At layer #17 (1.44mm) swap to Ivory White for the rest.
Comment & Rating (5)
All
Print Profile
0.08mm layer, 2 walls, 100% infill
1
Reply
Awesome work but two issues with them:
1 - Please list the colors used. Hard to tell which ones you used.
2 - Files for the three are mixed up. When you download godzilla - it's kong for example.
The designer has replied
0
Reply
I will edit it.. it should be showing colors as well as when to change in the break down,.. (not description)
0
Reply
All corrected now!! Should be ready to print!
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
1
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld