1 of 3 Godzilla X Kong hueforges I created for the films release.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA BambuLab Matte Dark Brown Transmission Distance: 1.9
PLA PolyTerra Earth Brown Transmission Distance: 0.3
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
Swap Instructions:
Start with Charcoal
At layer #12 (1.04mm) swap to Dark Brown
At layer #15 (1.36mm) swap to Earth Brown
At layer #17 (1.44mm) swap to Ivory White for the rest.