Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Kexcelled Red Transmission Distance: 4.5
PLA Kexcelled Light Orange Transmission Distance: 8
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Charcoal Black
At layer #12 (1.04mm) swap to Red
At layer #21 (1.76mm) swap to Light Orange
At layer #28 (2.32mm) swap to White for the rest.