Geometric cat wall art:

Default size is around 150cmx70cm. 106 pcs

All parts are numbered on the back and here you can find the numbers assignment :
geometric-cat-wallart.pdf

Organize pieces to the wall:

• use paper mask
  print pdf it with the same scale of your 3D print. cut all "triangles" (or only triangle's corners) tape it to the wall at the right level then place pieces to the wall.
  custom scale or custom paper format: you can generate the paper mask with the scale and the paper format that you want using adobe acrobat reader Dc ( free version) it lets you print in "poster" mode and select the paper format that you want.
• use projector
  print one or two page of the paper mask with the same scale of your print and tape it/them to the wall at the right level
  project the fullsize pdf, scale it and level it to the paper mask

Fix pieces to the wall:

• use velcro tape
• use double sided tape
• use hot glue
• use blu-tack ( you can also add small pieces of paper tape between wall and blu-tack to be sure to not have any traces to the wall)
• …

Paper mask: you can use these pdf files. Print on A4 pages format without margin and resizing.

• Full size: geometric-cat-wallart-fullsize_multiA4.pdf
• Half size: geometric-cat-wallart-halfsize_multiA4.pdf
• Custom: use this Fullsize pdf file adapt the dimension and paper format as you want

About the eye, there are 2 versions: one full (number 6) and another in 2 pieces (eye-ext and eye-int). from my side I only used the eye-ext and put and half ball (10mm) inside.

To fix all parts on the wall, I used velcro tape, in this way I can replace de piece or change pieces for another color and the main point is: it will be easier to remove the velcro tape from the wall if needed.

Credit design to theeleaves

Thanks to every makers that share me their photos !

other stuff on pictures:

• DIY wifi rgb lamp (in french...)

Follow me on Instagram to see more projects and works in progress