Buffer tube adapter for the Mosquito Open Beta 2
This replaces the standard back plate, the buffer tube then threads into the new back plate. Castle Nut provided to lock the stock into the position you require.
The buffer tube is hollow, allowing for battery wires to be passed through. there are locking holes on the tube to be used with an M4 style Crane stock.
No Supports required
No Brim Required.
I would recommend slowing the print down for the threaded sections however this is up to you and not required.
Hardware:
the same hardware used to attach the standard mosquito rear plate
4x M3 screws and nuts
Edit: 30/03/24
Added file for castle nut, stock tube no longer needs gluing to lock into place. simply use the castle nut as a locking nut to hold into place.