Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA Overture Space Gray Transmission Distance: 2.1
PLA Overture Matte Light Gray Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA PolyLite Yellow Transmission Distance: 11
PLA Default White Transmission Distance: 5

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Space Gray
At layer #9 (0.8mm) swap to Light Gray
At layer #13 (1.12mm) swap to Red
At layer #18 (1.52mm) swap to Orange
At layer #19 (1.6mm) swap to Yellow
At layer #23 (1.92mm) swap to White for the rest.

If you would like my work and interested in donating to the filament fund, or would want to have something special made, feel free to drop a donation or join my patreon for early access and request priority prints.

https://www.patreon.com/sblayeredcreations