Expanding the Zipper Pull collection, introducing the iconic Pac-Man! Have fun! =D

Items you need:

• 2 x “4mm x 30cm” paracord.
• 4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).
• Super glue (for the eyes and mouth).

Suggested print settings:

• Layer height 0.2mm.
• Infill 30% - Main Body.
• Infill 15% - Eyes & Mouth.
• Position the print in a way that the joining face is facing downwards.
• No supports are needed.

Suggested print settings for Connector:

• Layer height 0.2mm.
• Infill 50%.
• Perimeters: 5.
• Refer to the image for print orientation.
• No supports are needed.

Choose the body (both sides of the body are identical) where you'd like the connector piece to stay, and insert the longer end all the way in.

For more interesting zipper pull charms, be sure to track this tag (Zipperrific).

We've even conjured up a little home for our zipper pulls – because they deserve a stylish rest when they're not out and about with you! And to top it off, each zipper pull features a sneaky slit perfect for showcasing photos, name cards, and more. They're not just zipper pulls; they're your new tiny, table-top pals! 🌟

NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.