MOM Heart desktop Planter by CraftyCouple

CraftyCouple

Household>Decor

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.12mm layer, 2 walls, 5% infill

Designer

2.1 h

1 plate

3.0(2)

Open in Bambu Studio

Boost

Released

Description

A cute little succulent planter that says MOM. Print with PLA. May require changing speed to 50% or speed settings depending on the humidity in your area as the Heart area may not turn out correctly. using supports is required if you flip this on its side, but would result in a lot of post printing clean-up.

Comment & Rating (3)

@user_3997105844

Print Profile

0.12mm layer, 2 walls, 5% infill

Hart area failed twice on print, that was with supports

@Bigpappa52

Print Profile

0.12mm layer, 2 walls, 5% infill

Support Issue:the heart part of print didnt work. might be my fault.

The designer has replied

@CraftyCouple

try to slow your print to 50%. if using pla make sure your humidity is under 35% more so with PETG. We had great success with bambu PLA using standard print speed on a P1S, textured plate and door closed.

No more