MicroSD + Adapter case insert

I hadI had a TON of these little plastic cases for holding the microSD cards with the full size SD card adapter. To consolidate these cases I designed some inserts for them.

1. SD card holder: Holds 2 microSD cards in the spot for the SD card adapter (i.e. the holder is just the size of an SD card)
2. Full case holder: Holds 6 microSD cards filling the whole case. This requires removing all the little posts within the case.

To remove the posts, I believe some flush cutters should work, however I used a little chisel like this (even besides this project, this is one of my most used tools, highly recommend).

I didn't glue anything in, but you could.

Originally printed in PLA, 0.2mm height. Brim shouldn't be needed but I did use mouse ears on the full case holder.