This is my latest work, a knitted bear keychain.
The different sizes in the photo are for you to choose your favorite size.
The model in the print profile I uploaded is the smallest size in the photo(30.3*19.6*46.9mm), the size difference from model to model is about 20%.
You can change the size to your liking, but please note that if you reduce the size too much, the keyhole at the top may be too small to use!
All the models are printed in one color, and then the eyes, nose, eyebrows and mouth are colored with markers(i use 0.5mm fine tip marker), this is the easiest way for me to print, using multi-color printing may take more time and waste more filament, so I don't consider this way.
Because of the small size of the bottom of the work, I uploaded a print profile with the supports and brim set, I have printed it many times without problems, you can print it directly or download it and print it the way you like.
(**A little suggestion, please clean the print plate before printing, to avoid the model not adhere to the heatbed when printing and print failure, you can also use glue if necessary.)
If you have any thoughts about the model, please leave a comment and tell me. If I can, I will try my best to give you a satisfactory answer.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.