Charizard - Flexi Articulated Pokémon
Copyright Claim
Charizard - Flexi Articulated Pokémon
Boost
1123
1692
197
Print Profile(7)
singlecolor, 0.2mm layer, 2 walls, 15% infill
Designer
3.3 h
1 plate
multicolor, 0.2mm layer, 2 walls, 15% infill
Designer
20.5 h
1 plate
Multicolor and Monocolor Version Plates-ixpatch_charizard_v3
24.5 h
2 plates
MONO 70% SCALED organic support 0.2mm layer, 15% infill
2.1 h
1 plate
Click to see more
Boost
1123
1692
197
66
2.9 k
1 k
Released
Description
This is a flexible, articulated Charizard. It can stand on its feet and has a flexible neck, tail and wings.
It prints in place, no supports or assembly required, and is PLA compatible.
In addition to the single-color version, I have also included the multicolor version that you can see in my pictures. Enjoy :)
Comment & Rating (197)
All
Print Profile
singlecolor, 0.2mm layer, 2 walls, 15% infill
Great model, scaled up to 150%, everything moves perfectly
5
Reply
how doy You print it with out any support every time i print it one of the wings doesnt stick well i have a A1 printer
0
Reply
Replying to @user_3393364220
use hair fixer for the bed like caprice
0
Reply
what filament and what speed did you use?
0
Reply
Didn’t have the exact colours but it still printed amazingly as a multicolour print! Thank you!
8
Reply
Print Profile
MONO 70% SCALED organic support 0.2mm layer, 15% infill
lost bed adhesion so it developed a layer shift in one wing. fixed it with the heat gun
The designer has replied
0
Reply
hey I have a1 mini and Its very important to clean bed and add bed leveling and flow calibration before print , I printed and lot of people's this profile good 😊 have a nice day and thanks for 5 stars ! :)
0
Reply
best way to clean it? I had a slip in adhesion after a few days of running so i attempted to use glue stick. that seemed to make it worse. do I need a computer to do any modifications to the models? I have only my phone.
0
Reply
Replying to @user_2877076351
hey dish soap but not "balsam" ( no lipid base products) + soft sponge. now I'm using acetone or IPA :) . after few prints when you touch the pei , you leave micro greasy stains from fingers . after few prints I have bed adhesion problems if I not cleaned bed . Sorry for my English:)
0
Reply
Print Profile
singlecolor, 0.2mm layer, 2 walls, 15% infill
had issue with wings, possibly too much over hang? or too fast printing? (ran at normal 100% speed)
articulated joints and leg moving works great.
(Edited)Support Issue
0
Reply
I also encountered this situation
0
Reply
that is exactly My issue how did You fix it
0
Reply
I didn’t try to fix it sorry :( i think someone else mentioned running it slower on top half of layers for wings though as possible solution
0
Reply
How lovely dragon!! Easy printing with silk pla too.
4
Reply
Print Profile
multicolor, 0.2mm layer, 2 walls, 15% infill
What an awesome model! I was really worried about the brim as usually I absolutely hate printing with brims or supports. But this turned out really nice and it wasn’t too difficult to remove. Thank you for this awesome model :)
1
Reply
thanks for the brim feedback. this is what i came to the comments for.
0
Reply
Replying to @bjacoby00
No problem!
0
Reply
Print Profile
singlecolor, 0.2mm layer, 2 walls, 15% infill
there was some layer issue on the wings but the model looks amazing none the less!
1
Reply
Ooh, looks great in that color. Is that silver pla, or silk, or maybe something else?
0
Reply
Print Profile
multicolor, 0.2mm layer, 2 walls, 15% infill
Cool model. thank you.
1
Reply
Print Profile
singlecolor, 0.2mm layer, 2 walls, 15% infill
Top
1
Reply
Boosted
Print Profile
Less waste: 0.2mm layer, 2 walls, 5% infill
Printed it smaller but it still held up pretty well!
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld