Charizard - Flexi Articulated Pokémon by IXPatch

IXPatch

Toys & Games>Other Toys & Games

Print Profile(8)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

multicolor, 0.2mm layer, 2 walls, 15% infill

Designer

20.1 h

1 plate

4.8(195)

singlecolor, 0.2mm layer, 2 walls, 15% infill

Designer

3.1 h

1 plate

4.8(189)

single colour, 0.2mm layer, 2 walls, 10% infill

3.4 h

1 plate

4.9(40)

MONO 70% SCALED organic support 0.2mm layer, 15% infill

2.1 h

1 plate

4.8(42)

Click to see more

Open in Bambu Studio

Boost

2676

4337

656

693

7.4 k

3.5 k

Released

Description

This is a flexible, articulated Charizard. It can stand on its feet and has a flexible neck, tail and wings.

It prints in place, no supports or assembly required, and is PLA compatible.

In addition to the single-color version, I have also included the multicolor version that you can see in my pictures. Enjoy :)

Comment & Rating (656)

@lincoln.wagers

Print Profile

singlecolor, 0.2mm layer, 2 walls, 15% infill

Great model, scaled up to 150%, everything moves perfectly

@user_3393364220

how doy You print it with out any support every time i print it one of the wings doesnt stick well i have a A1 printer

(Edited)

@memo.moes

Replying to @user_3393364220 :

use hair fixer for the bed like caprice

(Edited)

@HyperSnap

what filament and what speed did you use?

@Aleandrus

Boosted

Print Profile

multicolor, 0.2mm layer, 2 walls, 15% infill

It came out nicely, with no visible faults. It feels really nice to play with, thanks to all the flexible parts. Loving it! =D Strangely the printing time dropped down whilst in progress. Bambu Studio expected a printing time of 1 day and 7 hours, but in the end took only 1 day and 5 hours. Only negative side is that it produced a lot, and I mean a LOT, of poops.

@s4mmyb

Didn’t have the exact colours but it still printed amazingly as a multicolour print! Thank you!

@djsente

Print Profile

singlecolor, 0.2mm layer, 2 walls, 15% infill

had issue with wings, possibly too much over hang? or too fast printing? (ran at normal 100% speed) articulated joints and leg moving works great.

(Edited)

Support Issue

@user_1338748489

I also encountered this situation

@user_3393364220

that is exactly My issue how did You fix it

@djsente

I didn’t try to fix it sorry :( i think someone else mentioned running it slower on top half of layers for wings though as possible solution

@Chassou

Boosted

Print Profile

multicolor, 0.2mm layer, 2 walls, 15% infill

very good profil but a lot of waste: 70gr pla for the Pokemon and 170gr pla for waste

(Edited)

@trevskeone

why not purge it into another item?

(Edited)

@user_3278022617

Replying to @trevskeone :

What do you mean by purging into another item? how does that work? Sorry i'm a newbie

(Edited)

@trevskeone

Replying to @user_3278022617 :

me too! you can put another object on your build plate, like a fidget spinner or something like that and it will use your color change “waste” to make it.

(Edited)

@3DP0

Print Profile

multicolor, 0.2mm layer, 2 walls, 15% infill

What an awesome model! I was really worried about the brim as usually I absolutely hate printing with brims or supports. But this turned out really nice and it wasn’t too difficult to remove. Thank you for this awesome model :)

@bjacoby00

thanks for the brim feedback. this is what i came to the comments for.

@3DP0

Replying to @bjacoby00 :

No problem!

@Godzilla_888

awsome

@user_2877076351

Print Profile

MONO 70% SCALED organic support 0.2mm layer, 15% infill

lost bed adhesion so it developed a layer shift in one wing. fixed it with the heat gun

The designer has replied

@tdulny

hey I have a1 mini and Its very important to clean bed and add bed leveling and flow calibration before print , I printed and lot of people's this profile good 😊 have a nice day and thanks for 5 stars ! :)

@user_2877076351

best way to clean it? I had a slip in adhesion after a few days of running so i attempted to use glue stick. that seemed to make it worse. do I need a computer to do any modifications to the models? I have only my phone.

@tdulny

Replying to @user_2877076351 :

hey dish soap but not "balsam" ( no lipid base products) + soft sponge. now I'm using acetone or IPA :) . after few prints when you touch the pei , you leave micro greasy stains from fingers . after few prints I have bed adhesion problems if I not cleaned bed . Sorry for my English:)

(Edited)

@coreypak8

Print Profile

multicolor, 0.2mm layer, 2 walls, 15% infill

I made it as big as possible and left for the weekend. printed around 133 scale up and .12mm. took like 30 hours.

@kukiesnmiuk

did you print in multi color or paint it afterwards? looks amazing

(Edited)

@MoJoJoJo_IV

Print Profile

singlecolor, 0.2mm layer, 2 walls, 15% infill

there was some layer issue on the wings but the model looks amazing none the less!

@tusk

Ooh, looks great in that color. Is that silver pla, or silk, or maybe something else?

(Edited)

@MoJoJoJo_IV

Replying to @tusk :

it is silver silk pla

@gulb

How lovely dragon!! Easy printing with silk pla too.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.