I Love making Hueforge Pictures and I am going to upload more and more of them so follow me if you like my work and i would be happy if you give me a like :)
You dont need an AMS . you can change manually the Filament if you want.
If you want it smaller or bigger , dont change the height! only change x and y together ;)
you can also use other Filament if you like
Use my Settings for best Results.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Yellow Transmission Distance: 10
Swap Instructions:
Start with Black
At layer #12 (1.12mm) swap to Red
At layer #20 (1.76mm) swap to Orange
At layer #22 (1.92mm) swap to Yellow for the rest.