This is the new Digital Bird Video Turntable / Pan Head part of the Digital Bird Camera motion Control system which incorporates: Dual action slider, Pan Tilt head, Video turntable and focus motor all working together using a WIFI controller.

Any part of the system can also work independently through the WIFI controller.

The Turntable is capable of moving up to about 10KG in weight and is perfect for product videos especially when working in harmony with the Camera slider and Pan Tilt head.

As with the slider the Turntable uses a magnetic encoder behind the stepper allowing you to manually position where you want it to start and finish without the need for joystick or app control. In turntable mode having camera shutter control makes it perfect for photogrammetry (3D scanning) since it offers programable shutter control. The head can also be used as an additional Pan axis for the Digital Bird mini Jib.

Turn the box on its head and you have a very functional Pan Head with auto Mount and dismount buttons capable of moving heavy camera setups.

The Turntable uses the same NP style batteries as the rest of the system.

Operating modes:

• A-B straight run
• A-B with acceleration controls (ramp/Ease)
• A-B-A Bounce mode
• Time-lapse mode with built in intervalometer and camera shutter control
• Six Key move sequencer for more complex moves
• Stop Motion Functions

PTZplus real-time functions

System Links:

• Component Kits: https://digital-bird-motion-control.myshopify.com
• Software: https://github.com/digitalbird01/DigitalBird-Camera-Slider
• 4 Axis Pan Tilt Head: DB3 4 Axis PTZ head
• Duel action Camera Slider: Digital Bird Slider
• Focus/ Zoom motor: MarkIII Focus motor
• Digital Bird Mini Jib: Mini Jib
• Compact WIFI controller: Compact Controller
• PTZplus WIFI Controller: PTZplus

Print Settings

Rafts:

No

Supports:

Yes

Resolution:

200

Infill: 25- 100% depending part

Filament: Matt PLA

Bill of materials

Bolts

• M5 cap head 40mm long -Pan shaft x1
• M1.7 Self tapping screws 10mm long x4
• M5 low profile bolt 10mm x 2
• M5 low profile bolt 30mm x 3
• M5 low profile bolt 50mm x 2
• M5 Nut x1
• M4 Grub screws 15mm long x2
• 1/4 -3/8th Camera screw adapter x1
• 5/8 -3/8th Camera screw adapter x1
• 1/4 -3/8th Camera screw male-male x1
• ¼ “ Camera screw with flip up head flip up diam 20mm screw length 15mm

Belts & Cogs

• GT2 6mm wide Closed loop timing belt 200mm circumference
• GT2 Pulley 16 Teeth 5mm bore 6mm belt for Nema 17 Stepper

Bearings

• 10x4x4 for belt tensioner x 1
• Deep Groove Ball Bearing 5x16x5mm x1
• 6811 2RS bearing 55x72x9mm x1

Electronics

• Digital Bird Mainboard with ESP32 and one Stepper driver
• Shutter cable 2.5mm Stereo Jack socket & 70mm cable
• Power Cable 180mm with DigitalBird NP Battery Terminals
• Switch Cable 150mm with two twitches
• Power switch harness 180mm long x1
• Aux power harness with 150mm cable
• OLED Display 0.49 Inch 128x32 res & Cable 140mm long
• AS5600 Encoder module with Magnet 150mm Cable
• Stepper cable 110mm long

Motor

• Nema 17 Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires Part No. 17HS15-1504S-X or equal max 49mm long

Sundry

• Magnets 8x3mm x 3
• 14mmx8mm round bubble level

Category: Camera