Fabrica3D

cover

IMG_20240321_095544_c68ea0b7-aed0-4744-a38e-2c81a177d319.jpg

MicHolder_cf0f6163-3e13-4538-b116-c78b5c90f7b4.jpg

plate_1.png

plate_1.webp

IMG_20240321_094948_19a3f533-cdbe-4fb6-8611-8394ff58e659.webp

0.2mm layer, 2 walls, 15% infill

thiz3D

Mic holder - large with mic.jpeg

Mic holder - large.jpeg

Mic holder - large on stand.jpeg

First, thanks for the original design, it was a great start to help my son repairing his microphone stand with a broken microphone holder! To fit my purposes, I made a few changes which might be useful to others;<ol><li>I enlarged the “cup” to be able to hold larger microphone (ours being admittedly larger than a standard mic&#39;)</li><li>I flattened the bottom, as in the original print the brim/support kinda ruined the bottom finish on my 1st attempt.</li><li>I slimmed down the holed connector from 6 to 5,2 mm, as it was a bit too tight in the original design to fit my mic&#39; stand.</li><li>I changed setting to get a more flexible holder ; thinner walls, gyroid infill at 8</li></ol>

For larger (wireless) microphone, bit more flex, flat bottom

LabAlex3D

microphone holder.jpg

8mm holder

Microphone holder - supporto microfono

Microphone holder

SquanchCaptain

20241205_155442.jpg

20241205_155425.jpg

20241205_155434.jpg

20241205_180035.jpg

Wireless Mic Microphone Clip

ASIA

Print Profile(3)

Description

Comment & Rating (23)

License

Remixes (1)

Related Models