Hier habe ich noch ein Natur Hueforge Bild für euch.
Das Bild ist Teil von einem Set und es sind Blätter mit besonderem Motiv.
Ihr könnt aus 4 verschiedenen Natur Motiven auswählen.Alle Naturbilder sind schon in meinem Profil.
Ihr fragt euch bestimmt, warum PETG?Weil ich gesehen habe, das solche Bilder mit Tropfen einen schönen Glanz bekommen und dazu hängen sie auch mal in der Sonne oder draußen und daher habe ich mich für PETG entscheiden.
Das hier hat die Größe 200x200
Ich habe die dicke etwas erhöht da sie mir beim Testdruck zu dünn waren, ihr könnt die erste Schicht anpassen im Slicer und
dazu müsst ihr das Bild nicht vereinfachen.Der Slice dauert dann etwas länger aber ist noch im Rahmen.
Ich weiß nämlich nicht, wie die Bilder werden, wenn die vereinfacht werden,weil ich die ohne
Vereinfachung ausgedruckt habe.
Gefallen dir die Bilder dann bitte denkt an euer Like oder Kommentar.
Bitte beachten:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.20mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #12 (1.04mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest.
- - - - - - - - - - - - - - - - -
Here I have another Nature Hueforge picture for you.
The picture is part of a set and there are sheets with a special motif.
You can choose from 4 different nature motifs. All nature motifs are already in my profile.
You're probably wondering why PETG? Because I've seen that such pictures get a nice shine with drops and if it is hanging in the sun or the picture came come out.And that's why I decided on PETG.
This one has the size 200x200
I increased the thickness a little because they were too thin for me when I printed the test. You can adjust the first layer in the slicer and
You don't have to simplify the image to do this. The slice will then take a little longer but is still within the frame.
I don't know what the pictures will be like if they are simplified because I don't have them without them
Simplification.
If you like the pictures, please remember to like or comment.
Please note:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.20mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #12 (1.04mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.