Original artwork by me via DALL-E and extruded with HueForge.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Paramount 3D Steel Gray Transmission Distance: 2.5
PLA Paramount 3D Prototype Gray Transmission Distance: 3
PLA PolyTerra Cotton White Transmission Distance: 2.5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Charcoal Black
At layer #6 (0.56mm) swap to Steel Gray
At layer #15 (1.28mm) swap to Prototype Gray
At layer #22 (1.84mm) swap to Cotton White
At layer #29 (2.4mm) swap to Jade White for the rest.