Robots need breaks too!
painting with filament with HueForge.
robots smoke break 2 is a fun hueforge to have on your wall
easy to print as well
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black Transmission Distance: 2.4
PLA Purple Transmission Distance: 2.4
PLA Pink Transmission Distance: 5.5
PLA Yellow Transmission Distance: 8
PLA White Transmission Distance: 4.8
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Purple
At layer #10 (0.88mm) swap to Pink
At layer #12 (1.04mm) swap to Yellow
At layer #21 (1.76mm) swap to White for the rest.