Aston Martin F1 Fernando Alonso Hueforge

Aston Martin F1 Fernando Alonso Hueforge

Boost
7
6
2

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.08mm layer, 1 walls, 100% infill
0.08mm layer, 1 walls, 100% infill
Designer
5.6 h
1 plate

Boost
7
6
2
0
10
3
Released

Description

Aston Martin F1 Fernando Alonso - 4 Color - Hueforge

 

I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!

 

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA Hatchbox White Transmission Distance: 10
PLA Overture Matte White Transmission Distance: 3.7

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Dark Brown
At layer #15 (1.28mm) swap to White
At layer #22 (1.84mm) swap to White for the rest.

Comment & Rating (2)

Please fill in your opinion
(0/5000)

Hello, is there a green version of the Aston setup or is it just the source photo? Somehow I can't get it to work. Thanks for the info.
The designer has replied
0
Reply
Sorry, just the source image is in color. Do you have Hueforge? you could play around with the image in greens to see if you could get it to your liking. I tried doing these in color but really struggled getting a result I liked which is why I went with the sepia sort of tone.
0
Reply
No more