A set of wizard bookends. The model needs support but it's relatively minimal. I recommend printing with 0.16mm layer height to capture all of the fine details. I've uploaded two 3MF files. The first is a Bambu Studio print profile the second is an Orca Slicer file. Orca Slicer has a feature called “make overhangs printable”. This will help the staff and fingers print neatly without support but obviously only works if you have Orca Slicer. If you don't, no worries! I have tuned the print profile for Bambu Studio to work without support on the staff or the hand. The hand in my test print came out fine with some minor artifacts. If you want a slightly cleaner hand you could delete the support blocker cube that encompasses the hand. If you want to build your own print profile be cautious of the staff. It's very thin and will break at higher layer heights if not supported or made thicker.