"Blossom" embodies the quintessence of spring, a symbol of renewal and the ephemeral nature of life's most beautiful moments. As trees shake off the remnants of winter, their branches burgeon with delicate blossoms, transforming the landscape into a canvas of vibrant hues and tender fragrances. This annual renaissance serves as a reminder of nature's cyclical journey, where each bloom's brief existence heightens its beauty.
In designing a decoration for beneath the plates at special meals, "blossom" inspires a motif that intertwines the elegance of spring with the art of dining. Each petal, rendered in soft pastels or vivid splashes of color, invites diners to a feast that transcends the senses, blending the visual feast of spring with the culinary delights that await.
This decoration does more than simply serve as a backdrop for exquisite dishes; it sets the stage for a dining experience that celebrates the renewal and joy that spring brings. It reminds us that, just like the fleeting blossom, special moments are to be cherished and savored.
For other designs in the collection, visit Endless Collection
This model is very thin, please take care when removing it from the bed. Maybe wait until cold.
This is a challenging model to print, so maaaany thin lines, but the result is 🥰.
Instead of enabling “Print Thin Walls” you can also try with “Arachne Perimeter Generator” https://help.prusa3d.com/article/arachne-perimeter-generator_352769
Printing it bigger could help also :P
Nozzle Size | 0.4mm |
Layer Height | 0.2mm |
Infill Density | 20% or more |
Infill Pattern | Cubic |
Print Thin Walls or Arachne | Enabled |
Wall Line Count | 2 or more |
Wall Orientation | Outer/Inner |
Supports | NO |
Material | PLA |
Print Orientation | STL orientation |
If you need to scale the model to fit your print bed, just be sure to scale in XY and keep Z as 100%. It needed 2mm height to fit collection stands.
Designed to be used with the collection universal stand:
https://makerworld.com/en/models/379586
You can see my other designs here 😉 → https://makerworld.com/@jtorregrosa