Dyna Dry Box / Filament Box 4L by Dynarun

Dynarun

3D Printer>3D Printer Accessories

Print Profile(7)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

2.1 h

3 plates

4.9(51)

0.12mm layer, 3 walls, 15% infill

Designer

20 min

1 plate

4.8(28)

All IN ONE plate, 0.2mm layer, 3 walls, 15% infill

2.8 h

1 plate

4.9(25)

(PTEG) Body 0.2mm layer, 3 walls, 15% infill

2.6 h

1 plate

4.9(8)

Click to see more

Boost

262

540

153

1 k

1.4 k

Released

Description

German:

Dry Box für Spulen mit einem Durchmesser von 200mm und einer Breite von 65mm.

Der Rollenhalter passt in die verlinkten 4L Dosen von Amazon.

Er ist komplett neu konstruiert, ich habe mich an unterschiedlichen Designs orientiert.

Rollenhalter + Rollen:

Diese Teile können ohne Korrekturen gedruckt werden, die Lagersitze haben 0,2mm Spiel.

Filamentdurchführung M14x1,5-G1/8:

Mutter M14x1,5 +0,15mm Loch-Kompensation

Schraube mit G1/8 +0,05mm Loch-Kompensation

English:

Dry box for spools with a diameter of 200mm and a width of 65mm.

The roll holder fits into the linked 4L cans from Amazon.

It is completely redesigned, I based it on different designs.

Roll holder + wheels:

These parts can be printed without corrections, the bearing seats have 0.2mm play.

Filament feedthrough M14x1.5-G1/8:

Nut M14x1.5 +0.15mm hole compensation

Screw with G1/8 +0.05mm hole compensation

Box / Behälter 4L: https://www.amazon.de/dp/B08CKB2B12?ref=ppx_yo2ov_dt_b_product_details&th=1

Bearings / Kugellager 608ZZ: https://www.amazon.de/dp/B08JLXN2BN?psc=1&ref=ppx_yo2ov_dt_b_product_details

Fittings PC4-M10 (G1/8): https://www.amazon.de/dp/B07SKX5P9P?ref=ppx_yo2ov_dt_b_product_details&th=1

Comment & Rating (153)

@marcelcountry

Print Profile

0.2mm layer, 3 walls, 15% infill

Nice I hope you don't mind I added an accessory designed by me https://makerworld.com/en/models/152659#profileId-166690

(Edited)

The designer has replied

@Dynarun

Very nice, i wanted to set licence to SA, that was my mistake when I published it. I like remixes an mods of my Parts :)

(Edited)

@marcelcountry

Replying to @Dynarun :

If you change the license, let me know and I will put it as a remix. Thanks

@Dynarun

Job done, happy remixing 😁

(Edited)

@cyclismo

A very good project. I've been looking for rollers that can handle the Bambu Lab Spools, they run about 67 mm. I took the rollers and scaled it to 69 mm in the Z direction. Then I took the scale factor and scaled the base and desicant cover in the Y direction. Printed them and it fit in my 4L container from US Amazon and it can accept the Bambu lab Filament spools. I would do a remix of it if I can figure out how to do it. I'm fairly new at this. Thanks Also couldn't figure out how to make my photo bigger but its a picture with a Bambu spool in my new print.

(Edited)

The designer has replied

@Dynarun

Hey thank your for your feedback. Yes, the EU Box is smaller than the US Box. On printables are the wider files. +2mm +5mm +10mm. You can use this 3mf, change the files in Studio and print it like the other. BG

@user_3857186329

Replying to @Dynarun :

Holla, ich habe mir das Zubehör wie in ihrer Beschreibung bestellt, und wollte gerade mit dem Druck beginnen. Leider bin ich mir jetzt unsicher, da wie hier beschrieben der Druck bezüglich der Größe angepasst werden muss. Ich bin ganz frisch dabei und nutze ebenfalls das original Bambulab Filament. Sie erwähnen in ihrem Beitrag 3mf verwenden. Gibt es hierzu fertige Dateien oder remixe Vorlagen? Ich würde mich sehr über eine Antwort freuen UND !! vielen Dank fürs teilen, war lange auf der Suche nach einer guten Lösung wie ihre :-)

@Dynarun

Replying to @user_3857186329 :

Mahlzeit. Die anderen Dateien beziehen sich nur auf Boxen mit anderen Größen, die sind zum ausprobieren auf printables. Die Dateien hier bei makerworld in der 3mf sind passend für die verlinkten Boxen. Es kann einfach gedruckt werden, ohne dass Anpassungen gemacht werden müssen, die Profile von mir sind passend eingestellt. Viel Spaß basteln! :)

@Phijon

Print Profile

All IN ONE plate, 0.2mm layer, 3 walls, 15% infill

Passt super und tolles Design! Keine Probleme beim Druck.

@Dynarun

Danke für dein Feedback, einen schönen Abend noch! :)

@MicRas

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

nice and useful, fit perfect in to 4L box from amazone 👍 thanks for sharing

@walkecaster

Print Profile

0.2mm layer, 3 walls, 15% infill

The print looks great, absolutely awesome design. i made it with the "608 Print in Place Bearrings" from SMichaud and it fits perfect

The designer has replied

@Dynarun

Thanks for your feedback. The idea with the bearings is great, i will try it too. :)

@dcappello

Print Profile

0.12mm layer, 3 walls, 15% infill

Nice design and fast and easy to print. Printed in Yellow Tough PLA from Bambu. Thank you for sharing the design

The designer has replied

@Dynarun

Thank you for printing and sharing your picture. Have a nice day :)

@Phate7

Print Profile

0.2mm layer, 3 walls, 15% infill

perfect, create fit

(Edited)

The designer has replied

@Dynarun

Very nice color, but that's not the bambu green, is it? Thanks for printing and liking :)

@Phate7

Replying to @Dynarun :

it is the sample Bambu green actually! :D

@Mire

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed very easily and with hardly any filament. The bearings fit with relative ease and allows the spool to spin easily in the box. I wanted a dry box to print some tpu from and have now printed a case for my phone and my wife and 2 cases for our air pods.