No Print Profile yet. Add one to earn points.
Benchy in a Storm
Note: Unfortunately, due to the licence associated with the ‘Benchy', I am not allowed to upload an STL or 3MF file that includes a ‘modified’ Benchy. However, I have included an unmodified Benchy STL, the hueforge print STL, along with detailed instructions on how to produce this print.
This is a combined style print, utilising both classic 3D printing and filament painting methods to produce this 2-in-1 'pop-art' effect type of print.
This print is essentially a hueforge print, swapping filament colours at specific layers, but with a twist! You will be adding a 'Benchy' (STL attached) to your print, and you can modify this however you want!
I have provided the STL of the Benchy, but you can download it from the source here: https://www.thingiverse.com/thing:763622
Steps to Print
Filament Swap Instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Swap Instructions:
Hope that makes sense! Please let me know if anything needs clarification!