3DecodeLab

cover

Mount 2_1119e83f-7506-4e49-b564-4acc575c734e.jpeg

Render 1_6661c1fd-67cb-4423-beec-ca5cda006142.png

Mount 3_217bf6f9-28dd-4200-8997-ee1c20afc587.jpeg

Mount 4_a491388d-3ee9-46ff-bad2-e210d70f6567.jpeg

Mount 5_c9d89403-6cb1-4679-9746-ad8e31494169.jpeg

Single

plate_1.png

Double

plate_2.png

Render 1_86b7c354-473d-4dbb-8dd9-6e5a806b44fe.webp

The wall mount part, where the bolts go, is positioned at the top, allowing the model to be printed flat on the build plate.&nbsp;Infill: 15% (Lower infill may also work)Supports: NoLayer Height: 0.2Wall Count: 2Nozzle: 0.4mmMaterial: PLA+

0.2mm layer, 2 walls, 15% infill

Render 1.png

Render 2.png

Finished 1.jpeg

The wall mount part, where the bolts go, is positioned at the bottom, so the model needs to be printed standing up.&nbsp;Infill: 15% (Lower infill may also work)Supports: NoLayer Height: 0.2Wall Count: 2Nozzle: 0.4mmMaterial: PLA+

0.2mm layer, 2 walls, 25% infill

Hello everyone,&nbsp;Wall mount design for the Amazon Basics Speaker USB, specifically model V620.&nbsp;Specifications:&nbsp;Printer: A1 MiniInfill: 15% (Lower infill may also work)Supports: YesLayer Height: 0.2Nozzle: 0.4mmMaterial: PLA+&nbsp;Note:I initially attempted to secure the mount using 3M Damage Free Hanging strips, but it proved insufficient due to the direction of the pulling force. I recommend using the mount screw holes for a more secure installation.&nbsp;Happy printing!&nbsp;&nbsp;

Print Profile(2)

Description

Comment & Rating (7)

License

Remixes (1)

Related Models

Amazon Basic Speaker Wall Mount