Search models, users, collections, and posts
Drilling Bounding Ring
IP Report
Print Profile(3)
![[All 3 Or Pick]: 0.12mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US2e02d2566abbf1/440538369/instance/2024-03-24_2b0f59e8169fa.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
[All 3 Or Pick]: 0.12mm layer, 2 walls, 15% infill
2.4 h
4 plates
PETG 0.16mm layer, 2 walls, 15% infill
36 min
1 plate
![[X1C] [PLA] [Fast] 5-10m Printtime, 0.28mm](https://makerworld.bblmw.com/makerworld/model/US2e02d2566abbf1/63792113/instance/2024-03-31_58c8ca4616de6.jpeg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
[X1C] [PLA] [Fast] 5-10m Printtime, 0.28mm
1.1 h
4 plates
Open in Bambu Studio
Boost
929
2481
63
18
1.1 k
549
Released
Description
Summary
When I needed a depth limiter for the drill, I downloaded models from other authors. These are interesting models with a collet lock. But in fact, they were useless, because the fixation on the drill was insufficient and the limiters simply slipped, especially when working with the hammer drill. So I created my own drilling depth limiter design.
I made three of the most popular diameters for drilling with a hammer drill 6-8-10mm. However, you can use the source file to modify it for yourself.
The model is printed without support, print in place.
To complete it, you will need: M4x12mm Hexagon Socket Screw and M4x7x2 Square Nut.
Parts links below:
M4x12mm Hexagon Socket Screw
M4x7x2 Square Nut
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (63)