Root Bound - Hueforge Print
Root Bound - Hueforge Print
Boost
30
34
3
Print Profile(1)
Root Bound, 0.4 nozzle, 0.08mm layer, 1 walls, 100% infill
Designer
4.3 h
1 plate
Boost
30
34
3
0
25
4
Released
Description
This is a 160mm x 240mm sized print, completed in approximately 4 hours.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Sunlu Dark Gold (Dark Brown) Transmission Distance: 1.8
- PLA+ Sunlu Coffee Transmission Distance: 3
- PLA Kingroon White Transmission Distance: 8
Swap Instructions:
- Start with Black
- At layer #8 (0.76mm) swap to Dark Gold (dark Brown)
- At layer #11 (1mm) swap to Coffee
- At layer #14 (1.24mm) swap to White for the rest.
Comment & Rating (3)
All
Print Profile
Root Bound, 0.4 nozzle, 0.08mm layer, 1 walls, 100% infill
This was a really fun print. I used base black, neon red and yellow and finished with white
the lighting from my camera doesn't do it justice but the colors really pop under UV or Blue light.
The designer has replied
1
Reply
I love the UV effect! that’s so great! thanks for the rating and the comment :)
(Edited)1
Reply
Print Profile
Root Bound, 0.4 nozzle, 0.08mm layer, 1 walls, 100% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld