I wanted a background for one of the original hueforge models, so I made a shadow box using it. The first plate is printed at 0.08mm layer height as originally designed, but the other two plates are printed at 0.04mm layer height. I reused my hangable frame model.

Plate 1:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.3
PLA+ Sunlu Red Transmission Distance: 4.0
PLA+ Duramic Purple Transmission Distance: 1.2
PLA+ Sunlu White Transmission Distance: 6.1

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Purple
At layer #7 (0.64mm) swap to Red
At layer #12 (1.04mm) swap to White for the rest.

Plate 2:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.3
PLA+ Sunlu Grass Green Transmission Distance: 2.8
PLA+ Sunlu Green Transmission Distance: 6.2
PLA Lovoon White Transmission Distance: 7.2

Swap Instructions:
Start with Black
At layer #6 (0.36mm) swap to Grass Green
At layer #7 (0.4mm) swap to Green
At layer #18 (0.84mm) swap to White for the rest.

Plate 3:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Blue Transmission Distance: 4.2
PLA+ Sunlu Sky Blue Transmission Distance: 4
PLA+ iBoss Pink Transmission Distance: 3.0
PLA Lovoon White Transmission Distance: 7.2

Swap Instructions:
Start with Blue
At layer #11 (0.56mm) swap to Sky Blue
At layer #17 (0.8mm) swap to Pink
At layer #18 (0.84mm) swap to White for the rest.