Having really enjoyed the Worker figure by [3DP RNS], I have designed a set of custom weapons compatible with the action figure! Note that the Worker figure itself is NOT included in this model, and this model is not affiliated with or approved by [3DP RNS]. Download the Worker figure here: https://makerworld.com/en/models/117513#profileId-137196

This model includes both mini and mega versions of the “Hexagun.” The Mega Hexagun connects to an optional backpack to power it's energy weapon. A piece of 1.75 mm filament is used as the connector. Here are assembly instructions:

First remove supports and brims (if used). I recommend brims for the color insert pieces, unless you are very confident in your built plate adhesion. The supports in the build profile should be sufficient, be careful when removing them from the connector between the gun body and the spinning barrels. Assemble the gun as shown:

Next assembly the backpack as shown:

When putting the backpack on the figure, bend the filament as needed to get the right positioning of the figures arm.

Enjoy, and please let me know what you think!