Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Gray Transmission Distance: 2
Swap Instructions:
Start with Orange
At layer #7 (0.64mm) swap to Red
At layer #15 (1.28mm) swap to Jade White
At layer #21 (1.76mm) swap to Gray for the rest.