Tips for printing:

• Supports: Yes (tree)
• Layer height: 0.16mm (optimal)
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: No

Colors and filament I used (5 Color Version):

• PLA / Marmor - for the egg
• PLA / Black - for the eye
• PLA / White - for the eye
• PLA / Orange - for the beak and feet
• PLA / Yellow - for the body

But you can print it in 4 colors too if you like! Here the (4 Color Version):

• PLA / Black - for the eye
• PLA / White - for the eye and egg
• PLA / Orange - for the beak and feet
• PLA / Yellow - for the body

Or decide for yourself which colors and how many you want to use!

When you're done printing, be careful not to break the feet while removing the model from the build plate!

When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!

Happy printing!