Dragon fire Hueforge by Mysstra hueforge

Mysstra hueforge

Art>2D Art

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.08mm layer, 2 walls, 100% infill

Designer

4.9 h

1 plate

4.7(7)

Open in Bambu Studio

Boost

Released

Description

imagen de un dragon escupiendo fuego sobre la montaña, he usado hueforge pop color para poder imprimirlo en 3d

rint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Jade White
At layer #15 (1.28mm) swap to Black
At layer #18 (1.52mm) swap to Red
At layer #21 (1.76mm) swap to Yellow for the rest.

Comment & Rating (7)

@armsby

Print Profile

0.08mm layer, 2 walls, 100% infill

looks really good

@smokingrog

Print Profile

0.08mm layer, 2 walls, 100% infill

great print

@BrockStar2u

Print Profile

0.08mm layer, 2 walls, 100% infill

beautiful for a friend

@liquidbase

Print Profile

0.08mm layer, 2 walls, 100% infill

Had to reduce the height of the outlet on the hepa module slightly, as it is almost flush with the top frame. This breaks the frame that ensures that the modules stand neatly on top of each other. Otherwise the Air Scrubber is well thought out and easy to print. The only thing I am still looking for is a way to lead the cables out.

(Edited)