UPDATE:

(01/04/24) 8:27pm - Print Profile has been corrected and fully tested with the correct Base. Thank you to @SouthlandPrints for pointing out an error in my print profile.

(01/04/24) 2:30pm - Print Profile has been temporarily removed due to incorrect base size. Please use the raw model in the meantime.

Inspired by Japanese simplicity, this swatch box is designed to hold 20 swatches per column.

フィラメント見本 translate to Filament sample

Features:

• box is design to hold 24x24x2mm swatches
• Magnets is secure the lid onto the base
• swatches are angle at 60 degree
• Each Swatch row increases in height to maximize viewability
• base sides are design to make it easy to seperate the lid

Requirement:

• Super Glue
• 16x 4mm diameter x 2mm thick Magnets
• small hammer
• Bambu Lab swatches or your own swatches you can 3D Print (24x24x2mm swatches)

Assembly:

• Apply suppler glue to the 16 holes on the lid & case.
• Push the magnets into the holes, ensure that magnets on the lids and base attract each other.
• use the hammer to push the magnets fully into the hole.