TPU Bushing for Floating Logo Signs
Copyright Claim
TPU Bushing for Floating Logo Signs
Boost
23
33
25
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
14 min
1 plate
Boost
23
33
25
0
166
275
Released
Description
This bushing is used to secure an acrylic rod (https://www.amazon.com/dp/B09SKYYS5X?ref=ppx_yo2ov_dt_b_product_details&th=1) into a 14mm hole with a 2 degree draft angle. The bushing is inserted with the draft angle out, therefore locking the bushing into the part. This is printed in TPU and was designed to provide a secure connection to the acrylic rod that has slight manufacturing diameter deviations.
If you like this design, think about buying me a coffee (let's be honest- it's going towards filament)- https://www.buymeacoffee.com/thehangardesigns
Comment & Rating (25)
All
A design and printing of 10! After several tests I leave the parameters in case any partner can be useful for the hooks. I gave a touch of glue to leave the hooks well firm🥰.
2
Reply
Great sign/plaque --- I created the Rods for the floating back vs. buying -- you can glue them or leave as tight fit.
check them out and let me know what you thinks...
https://makerworld.com/en/models/92384
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Another great design thank you.
I just bypassed the clear rod and printed them 400% longer on the z and 97% on the x and y
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Very easy print. Very plug and play.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I like the idea and I remixed to have different height. I’ll upload in next couple days
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Very helpful
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
prints well. I used PLA.
fits base and M snugly.
need to lightly ground then dowel to fit…
all good
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld