This is a simple tube and cover to use for storing drill bits (to keep them from getting damaged in storage). This was designed for a 15/32" bit and has an ID of 12.378mm and should accommodate bits between 143 and 159mm long. The cap has several notches to hold it on and also adjust the length. It may be possible to scale this in your slicer and make it work for other bits, however scaling down will only work to a point as the model is only 2 walls thick. I may post some others in the future but for now, this is all I got.

If you make one, please post a make.

This was printed in PETG with 0.28mm layers.

This was designed using ViaCAD V12 PRO
Step File is included for easy remixing and the parts are not oriented for printing.

(imported from Printables)

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here or on Printables, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!