This is a 2 part “Shutdown” button. It was designed for a 0.4mm nozzle and I suggest using a layer height of 0.1mm, but it should look OK with larger layers. I printed it so the outside face was printed down, which will give it a shiny look if the bed is smooth.

There is about 0.17mm of gap to allow the inserts to fit, so they should be glued in place (Gorilla SuperGlue Gel works well on PLA). The inserts have a bevel at the bottom to help with getting them installed, but you may still need to clean up any elephant foot on the inserts prior to installing (or they may not fit the tight pockets they go into).

If you print one, please post a make. The STEP file is included for easy remix'n.

(imported from Printables)

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here or on Printables, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!