Baby Bone Dragon by The Dragons Den

The Dragons Den

Toys & Games>Other Toys & Games

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 10% infill

17.9 h

1 plate

4.6(9)

Multicolor and Monocolor version plates

24 h

2 plates

5.0(2)

Boost

272

307

570

184

Released

Description

Baby Bone Dragon test printed down to 60%. People have asked why dose the head come off, well now you know :) This baby standing series is something special. The heads can be changed from one dragon to the next. (Standing Crystal Baby not included)

***Model has been fixed and printed on a Bambu.***

10 to 15% infill
3 to 4 lines
.1 or .2 height
No support
Print in place.
Curled STL
Print with raft or brim if doesn't stick.

Please feel free to post pics of your makes. I would love to see them.

If you would like to sell the prints join us on Tribes or Patreon for a seller's permit.

These files are for personal use only unless you have the sellers permit. The Dragons Den models are under copyright.

The Digital files are never to be re-sold, shared, or given away.

patreon.com/TheDragonsDen411

You can join The Dragon's Den Discord to exchange with me and the community. discord.gg/k2KFnXNuBV

Comment & Rating (27)

@All_Might_32

I sized down the head to 99% because all the comments said the head falls off and I can hold it by the head as well as flick spin it all the way round a couple times and it has no problem staying on.

The designer has replied

@TheDragonsDen

love the idea. ty

@RealityPrinting

The print profile is no longer public

The head will not stay on, I know it's ment to be interchangeable but it falls right off, I wouldn't want to give it to a child and them being upset that the head won't stay on.

(Edited)

@Hausboy

Print Profile

0.2mm layer, 3 walls, 10% infill

Turned out great! Added a infinity cube to flush into. Only wish I had noticed brim was turned on, dont like cleaning brims off. Overall cool design! Thanks

@hutslarjohn

Print Profile

0.2mm layer, 3 walls, 10% infill

print came out beautiful no supports needed loved it good choice

@tg2lore

Bambu lab Yellow, Gold, red sparkle, orange. Took just over 14 hours.

@Tech_Outreach

Print Profile

0.2mm layer, 3 walls, 10% infill

turned off brim in profile didn't touch anything else and it turned out great

@the_articorn

Gestern gedruckt. Sehr niedlich und ohne Probleme.

@Zebzemporium

The print profile is no longer public

I ran out of green 77% done and only had white haha. Great print apart from the head not staying on as much as I'd hoped

@renebramirez02

The print profile is no longer public

turned out great assembled easily, brim was a bit difficult to remove but not impossible

@ironponds

The head does not sit properly and falls right off. its like the cavity should be deeper for the ball at the top of the neck. Ran this twice. Same issue on both with different p1ps

The designer has replied

@TheDragonsDen

yep its because Bambu is a better printer than what I have I will load the new head on here with a tighter joint.

@Bronwyn.hobson

Replying to @TheDragonsDen :

the head will also not join or stay on and i used the tighter 2 joint, any suggestions please

@TheDragonsDen

I will have to fix it. I just got a Bambu so I will fix it then print it and load the new stl tomorrow.

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Flexi Baby Dragon - Articulated Fidget

SugarPaws

254

532

Bone Dragon - Articulated Dragon

Bearded Printer

261

383

Baby Dragon - Articulated Dragon

Bearded Printer

515

881

death snail

Danii