Playstation logo Lightbox LED Lamp
Playstation logo Lightbox LED Lamp
Print Profile(2)
Description
This 3D model is a captivating lightbox that features the iconic PlayStation logo, a symbol revered by gamers around the world. The design elegantly represents the PlayStation legacy, with its sleek lines and recognizable branding, evoking a sense of nostalgia and excitement for gaming enthusiasts. When illuminated, this lightbox creates a visually striking effect, showcasing the PlayStation logo in all its glory. Whether you're a dedicated gamer or simply admire exceptional design, this PlayStation lightbox is a fantastic addition to any gaming setup or living space. Let the PlayStation spirit illuminate your room with this impressive 3D printed lightbox.
If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!
WARNING!
- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!
Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB or go wild with RGB
- as long as the LED density isn't too low (very few LED's per meter) you should be able to achieve a good result
- soldering iron (optional)
RECOMMENDATIONS
- use a textured PEI sheet
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer
- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible
Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color
How to make a hole in Bambu Studio:
Assembly video:
Comment & Rating (48)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
