This box has two different bottoms and 3 different tops. The boxes are 4" diameter by 2" tall. There are 3 files. I had to break them up because they needed different settings. The bottoms will use a variable layer height, so the threads come out right. I spent 2 days testing what would work best.

The lids are printed top down and are printed in two colors. I did raise the print temp to 230 for the first layer to get better results. If you print the lid in one color you will not get any designs.

I have used the holographic plates to print these lids. You will need to set your plate temp to 70 and turn off your plate detection. I use the smooth PEI plate in the slicer and set that one to 70 degrees.

The file is also set to print the black on the lids second. You want to lay the main filament down first. They are colored on the objects tab.

If you have questions, let me. If you change the settings in the profile you may not get the same results.