"WARNING Coffee Zone" Table
Copyright Claim
"WARNING Coffee Zone" Table
Boost
26
29
6
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
5.5 h
1 plate
Open in Bambu Studio
Boost
26
29
6
1
46
10
Released
Description
I've created an authentic table in vintage style for all coffee lovers. You only need 3 colors, can be printed without AMS as well.
Size is approx. 25cm x 17cm.
Printing Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
Swap Instructions:
Start with Black
At layer #19 (1.6mm) swap to Ivory White
At layer #24 (2mm) swap to Scarlet Red for the rest.
If you print, don't forget to send pictures from the table and your coffee rig!
If you are satisfied with my design, I would be delighted if you could support me!
Comment & Rating (6)
All
Resized to A1 Mini. Worked out reasonably, but the resize made the layers a bit too thin, so it looks "smudgy". But still a nice print.
The designer has replied
0
Reply
You resized it only against X/Y axes, right?
0
Reply
Boosted
Thank you.
(Edited)0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld