Jeep Wrangler Hueforge. Profile is set up for NON-AMS, has manual pauses.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA Paramount 3D British Racing Green Transmission Distance: 3
PLA PolyTerra Earth Brown Transmission Distance: 0.3
PLA PolyLite Pro Yellow Transmission Distance: 11
PLA PolyTerra Arctic Teal Transmission Distance: 0.5
PLA Overture Matte White Transmission Distance: 3.7

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to British Racing Green
At layer #9 (0.8mm) swap to Earth Brown
At layer #10 (0.88mm) swap to Yellow
At layer #15 (1.28mm) swap to Arctic Teal
At layer #18 (1.52mm) swap to White for the rest.
 

If you would like my work and interested in donating to the filament fund, or would want to have something special made, feel free to drop a donation or join my patreon for early access and request priority prints.

https://www.patreon.com/sblayeredcreations