T-35 SOVIET MULTI-TURRET HEAVY TANK

1:24 Scale

Warning!

When printed on FDM printer, model may take an estimated 166 - 170 hours or about 7 days at a 0.15mm layer height with 15% gyroid pattern infill. Model will use over 1kg of filament.

Modified from Google's 3D warehouse model.

Recommended Print Settings

The displayed example was printed using the default 0.15mm layer height quality setting on Prusa Slicer. Infill was 15% and a gyroid pattern. The inserts can be printed at 0.3mm layer thickness to reduce time since those parts are not aesthetic-critical components. Inserts can also be printed in other colors like in this display model to use up any old filament you've got lying around!

When slicing, you don't need to use supports! Just print as-is. The only exception is the side ladders which are best printed separately. More details about their printing process down below

Model Dimensions

Length: ~16.7in or ~42.5cm

Width: ~5.9in or ~14.9cm

Height: ~5.7in or ~14.6cm