Starwars R2D2 Figure wall art (hueforge). This one is scaled at 8" tall, about the right proportion to the C3PO figure I have as well as seen in the photos.

you can scale to any size you want, but make sure you don't change the “Z” axis height or it will throw off the color sequence.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
PLA+ Sunlu Red Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.56mm) swap to Blue
At layer #14 (0..76mm) swap to Grey
At layer #18 (.92mm) swap to Orange
At layer #21 (1.04mm) swap to White
At layer #34 (1.56mm) swap to Red for the rest.