I like the RC crawler from triafgg
But my last printed one's chassis rail was broken, so I am trying to redraw it by myself.

Here are some changes:

1. Put battery at rear side, ESC & receiver at front side
2. Rear cover can be opened
3. Reset shocks position on body & shock bracket
4. Make chassis rail as 5mm
5. Make chassis rail lower than original, also less holes
6. Upgrade for bonnet with bumper
7. Make 2 holes on bumper for LED light put on
8. ......
   
   

WHAT YOU NEED

1. Motor
2. ESC
3. Servo
4. Receiver
5. Gearbox
6. Front & Rear axle
7. Shocks
8. Drive shaft
9. Link rod
10. M3 & M2 screws
11. Shell Clips
    
    

About ESC tray

I know everyone has different size of ESC and receiver
you may need to mod this part to suit yours.

About battery tray

Well, the length of the battery I'm using is 93mm.
If yours cannot fit in, you may mod rear cover to make a fairish space.

UPDATE:

1. shock bracket left & right (2019-06-01)
2. gaskit.stl is 3mm for shocks and gaskit2.stl is 1.8mm for window body(2019-06-01)
3. rear cover tube V2 uploaded