Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PETG JAYO Black Transmission Distance: 0.3

PLA+ IIID Max Fluorescent Green Transmission Distance: 8

PLA BambuLab Matte Ice Blue Transmission Distance: 3.5

PLA BambuLab Basic Jade White Transmission Distance: 5

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:

Start with Black

At layer #5 (0.48mm) swap to Fluorescent Green

At layer #11 (0.96mm) swap to Ice Blue

At layer #18 (1.52mm) swap to Jade White for the rest.