Straight AMS Y-Splitter

Straight AMS Y-Splitter

Boost
32
66
17

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.12mm layer, 2 walls, 15% infill
0.12mm layer, 2 walls, 15% infill
Designer
29 min
1 plate
4.0(3)

Boost
32
66
17
0
164
124
Released

Description

straight path filament PTFE tube Y-splitter for AMS to use a separate spool without disconnecting the AMS tube.

No need for pneumatic coupler/connector

 

You can created a "NO AMS" Printer where you just remove the AMS gcode. So you don't need to disconnect the AMS anymore or disable it. Further you can use a automatic filament change function without AMS by painting or set a change at a layer which will call a new "change filament" G-code that is now retracting and cutting the filament then unloading and waiting with a pause.

You simply can now remove the filament and insert the new, after confirming it will purge, wipe and commence your print. And after (end -gcode) it is cutting and unloading again so you can just pull the filament after the print in case your next is using the AMS again or you want a different color next time.

;Filament Change

G1 X40 Y-3 E-20 F2000 ;retract and move to Cut position

G1 X0 F1500 ; CUT

G1 X54 F2000 ; x purge pos

G1 Y265  ; y purge pos

G1 E-20; unload

M400 U1;Pause wait for change and confirm

G1 E45 F250 ; Purge

G1 E-3 ; retract

G4 S3 ; wait

G1 X60 F10000 ; shake

G1 X50

G1 E3 F500 ; prime

G1 X100 F8000 ; wipe

G1 X60 ; wipe

G1 X120 ; wipe and commence

;Filament Change End

Comment & Rating (17)

Please fill in your opinion
(0/5000)

The print profile is no longer public
Printed and works perfectly!
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
Didn't let thebfilament through well.
The designer has replied
0
Reply
Check the inside if maybe something went wrong with your print - or just print again with different filament. You can also pull a filament through and move it back and forth to smooth the inside.
0
Reply
Did you ensure that your filament is ALWAYS cut at the extruder?
0
Reply
hey can u please explain it to me how i can create a print profile without ams? Thnak u
The designer has replied
0
Reply
You simply just remove all the G-code that is telling the AMS to do something mainly the T (toolchange) ,M620 and M621 (i would share my code but i have changed so much more that would confuse you and need other config changes to work). Also be aware that changing g-code will force your printer to do things - there is no safety preventing anything.
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
great thanks
0
Reply
The print profile is no longer public
worked perfectly
0
Reply
The print profile is no longer public
my first abs print
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
1
Reply
The print profile is no longer public
0
Reply
The print profile is no longer public
0
Reply
The print profile is no longer public
0
Reply