Bookmark Display Stand by Jeff Smith

Jeff Smith

Tools>Organizers

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

Designer

5 h

1 plate

5.0(1)

0.2mm layer, 2 walls, 10% infill

Designer

16.7 h

2 plates

Boost

147

171

122

Released

Description

Updates/Configurable version of this stand can be found at Flexable & Configurable Bookmark Stand by Jeff Smith - MakerWorld

Wanted a stand to hold bookmarks as I've been making a few of them lately. The slots are sized for the bookmarks I make and are 1.25mm deep (15 degree angle as shown in the second picture) and 22mm wide. If you have bookmarks from others, they will likely fit, but might wiggle a little side to side. I've included the .STEP file in this upload so those who are capable and so inclined can change it to fit their requirements.

Comment & Rating (12)

@user_823627424

the slots need to be wider. i downloaded book marks from makers world. i did no adjustment to them i just printed them.

The designer has replied

@JeffSmith

The bookmark stand was made for the bookmarks I make; however, I also provided the step file (source file) so that anybody can modify the slots to whatever size they need since any other than my bookmarks may be wider or more narrow. That said, I'm playing around with an idea that would let somebody adjust the width based upon the row of bookmarks.

@user_823627424

Replying to @JeffSmith :

Thank you Jeff, Were can i find your book marks are they available? Debra

@JeffSmith

Replying to @user_823627424 :

Hi Debra, Yes, just search "Jeff Smith" on makerworld here and you should see them. Jeff