Hey there, I Designed this style of Funko Pop out of the box wall mount because I didn't like any of the ones are available. I wanted something that was very minimal but still had enough strength to support the bobble heads. I also designed the circle to have a small lip all the way around so that the Funko Pop can't slide off. I also used #10 ¼ X 20 screws to mount mine to the wall, the holes are a little snug, but they should have no problem threading through the mount into the wall. I also have a 3mf file attached, I hope it has the mount auto rotated. If not, simply rotate the mount with the side that would attach to the wall on the build plate to print without supports. This is my first upload so please let me know what you guys think, any feedback is great feedback!