Kevin Staab ‘Scientist’, SIMS, Skateboard Graphic.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Black Transmission Distance: 0.3
Red Transmission Distance: 4
Orange Transmission Distance: 5
White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #14 (1.2mm) swap to Orange
At layer #17 (1.44mm) swap to White for the rest.
These are the colours I used. But mix it up and have fun!
Resize as you'd like, just remember to keep the 'Z' axis at 100%.